活動房施工的時候還要根據工程需要，為避免冷橋產生，屋面施工可以考慮在檁條上墊一些硬質保溫材料。安裝時保持玻璃棉卷氈的張緊、對齊、卷與卷之間的接縫緊密，縱向需要搭接時，搭接處應安排在檁條處。做到以上濟南彩鋼板房的防潮問題就會迎刃而解，活動房將會更加的舒 適，被更廣大的群眾所接受。
During the construction of the movable house, some hard thermal insulation materials can be padded on the purlin in order to avoid cold bridge. During installation, keep the tension and alignment of glass wool roll felt, and the joints between rolls are tight. When it is necessary to overlap longitudinally, the overlap shall be arranged at the purlin. To achieve the above, the moisture-proof problem of Jinan color steel plate house will be solved, and the movable house will be more comfortable and accepted by the wider masses.
1、擠出焊接
1. Extrusion welding
此方法應在制件沒計初作出，由于焊接方法對制件描繪的需要可所以重要的，且不相同焊接方法同不相同顯蓍。
This method should be made at the beginning of the part. Because the welding method is important for the description of the part, and different welding methods are different.
2、熱板焊接
2. Hot plate welding
熱板焊接(對平型制件)，它是用電加熱金屬模具使被聯接塑料制件表面軟化的熱塑性焊接進程。幾乎適用于所有的或大或小的熱塑性制件。共同適宜焊接較軟的半結晶熱塑性塑料如PE板或PP板。
Hot plate welding (for flat parts) is a thermoplastic welding process that uses electric heating metal mold to soften the surface of connected plastic parts. It is applicable to almost all large or small thermoplastic parts. It is suitable for welding soft semi crystalline thermoplastic, such as PE plate or PP plate.
3、熱氣焊接
3. Hot gas welding
熱氣焊接是廣泛用于彩鋼復合板出產很大制件的焊接方法。用與被焊接制件相同的聚合物出產焊條是重要的擠出焊接是由熱氣焊接展開而來的焊接方法。
Hot gas welding is a welding method widely used to produce large parts of color steel clad plate. It is important to produce welding rods with the same polymer brand as the welded parts. Extrusion welding is a welding method developed by hot gas welding.
