What is the reason for the leakage of Jinan movable plank house? Theoretically speaking, the movable plank house we installed is not easy to leak, so what causes the leakage? Let's have a look.
集裝箱活動板房在安裝過程中已經安裝了彩鋼板不注意保護，隨意踐踏屋頂，破壞了屋頂?shù)钠秸取?/div>
In the process of installation, the color steel plate has been installed in the container movable board house, which does not pay attention to protection, tramples on the roof at will and destroys the flatness of the roof.
二是集裝箱活動板房面板由于跨度過大，屋面板接縫處，安裝往往難以滿足設計理論標準，造成雨水滲漏。
Second, because of the large span and the joint of the roof slab, the installation of the movable deck is often difficult to meet the design theoretical standards, resulting in rainwater leakage.
三是施工關鍵節點疏漏，頂管延伸，通風口根塞孔不嚴格，防水層透水高度不夠。保溫層施工過程中遇雨，排氣孔堵塞，排氣孔設置不合理，造成保溫層長期被淹。
Third, the construction of key nodes leakage, pipe jacking extension, vent root plug hole is not strict, waterproof layer water permeability height is not enough. In case of rain during the construction of the thermal insulation layer, the vent hole is blocked, and the vent hole is set unreasonably, which causes the thermal insulation layer to be flooded for a long time.
四、集裝箱活動房的天溝橫向無坡面，安裝時應留有一定的坡面，少0.5%，天溝接縫、焊接縫隙、焊接、渣或無腐蝕。
4、 There is no slope in the gutter of the container mobile room horizontally, and a certain slope shall be reserved during installation, at least 0.5%. Gutter joints, welding seams, welding, slag or corrosion are not allowed.
五、集裝箱移動式房屋在施工過程中使用了不合格的材料，施工中很隨機，沒有嚴格按照施工規范操作。
5、 Unqualified materials are used in the construction of the container mobile house, which is very random during the construction, and the operation is not strictly in accordance with the construction specifications.
以上是
濟南活動板房廠家小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.fptdc.cn
The above is the relevant content introduced by Jinan activity board house manufacturer. If you want to know more, please visit the website: http://www.fptdc.cn
